61 Princeton Hightstown Rd, Unit-2C, Princeton Junction, NJ 08550

TATTOOLASE
THREE-LASER TATTOO REMOVAL PROTOCOL
SERVING PRINCETON, NEW JERSEY AND SURROUNDING COMMUNITIES

TattooLase is our proprietary three-laser tattoo removal protocol designed by Dr. Jetty, combining fractional Erbium preconditioning with the Cutera enlighten III picosecond platform to safely use significantly higher laser energy and reduce session count by approximately thirty percent.

TattooLase: The Three-Laser Tattoo Removal Protocol Designed by Dr. Jetty

EXPERIENCE EVIDENCE-BACKED ADVANCED TATTOO REMOVAL

TattooLase is the three-laser tattoo removal protocol developed by Dr. Siva Teja Jetty, MD at Princeton Aesthetics. The protocol combines fractional Erbium preconditioning with both unfractionated and fractionated picosecond laser delivery on the Cutera enlighten III platform. Published peer-reviewed evidence (Marini et al., Journal of the Laser and Health Academy, 2012) demonstrates that fractional Er:YAG preconditioning prior to laser tattoo removal approximately doubles the skin’s safe laser energy tolerance and reduces the total number of treatment sessions by approximately thirty percent. Additional clinical evidence from the Journal of Cosmetic Dermatology (2022) confirms that combining fractionated and unfractionated 1064 nm picosecond delivery clears tattoos more effectively and with fewer adverse events than picosecond treatment alone. TattooLase brings both mechanisms together into one physician-designed protocol.

THE THREE-LASER TATTOOLASE PROTOCOL

FRACTIONAL ERBIUM PRECONDITIONING

The treatment begins with a fractional Er:YAG pass on the Fotona SP Dynamis Pro that creates microscopic channels through the epidermis above the tattoo. Published peer-reviewed data (Marini et al., 2012) show that this preconditioning step approximately doubles the safe laser energy the skin can tolerate. The microchannels act as pressure relief ducts that allow gases from thermal ink decomposition to escape, preventing the sub-epidermal blistering that limits single-laser tattoo removal.

TRI-WAVELENGTH UNFRACTIONATED PICOSECOND

Following the preconditioning step, tri-wavelength picosecond delivery on the Cutera enlighten III platform targets the full color spectrum of tattoo inks. Three wavelengths (1064 nm, 532 nm, and 670 nm) are used in calibrated combinations matched to each tattoo's specific ink colors. The picosecond pulse duration generates a photoacoustic shock that fragments ink particles into sizes the immune system can clear.

FRACTIONATED PICOSECOND AT LOWER FLUENCE

The third step applies fractionated picosecond delivery at lower fluence using the Cutera enlighten III's microlens array. Laser-Induced Optical Breakdown creates discrete sub-cellular cavitation zones in the dermis that promote collagen remodeling, break down dermal fibrosis trapping ink, and accelerate clearance. Published clinical data (Journal of Cosmetic Dermatology, 2022) demonstrate this step improves clearance rates from 69.2 to 84.6 percent over three sessions versus unfractionated picosecond alone.

TattooLase three-laser tattoo removal at Princeton Aesthetics — Cutera enlighten III + fractional Erbium preconditioning

What is TattooLase?

The Three-Laser Physician-Designed Protocol

TattooLase is the three-laser tattoo removal protocol developed by Dr. Siva Teja Jetty, MD at Princeton Aesthetics. Each session sequences fractional Erbium preconditioning, tri-wavelength unfractionated picosecond delivery on the Cutera enlighten III platform, and fractionated picosecond delivery at lower fluence. The combination is supported by published clinical evidence (Marini et al., 2012; Journal of Cosmetic Dermatology, 2022) demonstrating significantly higher safe laser energy tolerance, approximately thirty percent fewer sessions, and improved tattoo clearance rates compared with picosecond-only protocols. Every TattooLase session is performed by Dr. Jetty personally.

TREATMENT APPLICATION

TattooLase treats body and cosmetic tattoos across all colors, ink types, and ages. Each session sequences three laser steps: fractional Er:YAG preconditioning on the Fotona SP Dynamis Pro, tri-wavelength unfractionated picosecond on the Cutera enlighten III, and fractionated picosecond at lower fluence on the same enlighten III platform. Most patients complete a course in four to eight sessions spaced six to eight weeks apart, compared with five to twelve sessions typical for picosecond-only protocols.

EFFECTIVE FOR COMPLEX TATTOOS

TattooLase addresses dense professional tattoos, multicolored body art, cosmetic tattoos, traumatic tattoos, scarred tattoos, and tattoos that have stalled with prior picosecond-only treatment. The Erbium preconditioning step makes safe treatment of darker Fitzpatrick skin types possible at energies that single-laser protocols cannot tolerate without scarring.

For patients with simpler tattoos who do not require the advanced three-step protocol, we also offer Enlighten Tattoo Removal using the same Cutera enlighten III platform without the Erbium preconditioning step.

What Sets TattooLase Apart?

THE PROPRIETARY THREE-STEP PROTOCOL

TattooLase is not a single device or a packaged manufacturer protocol. It is a physician-designed three-laser sequence built around the published clinical evidence for combining fractional Erbium preconditioning with picosecond tattoo removal. Designed by Dr. Jetty, performed only at Princeton Aesthetics.

APPROXIMATELY 30% FEWER SESSIONS

Published clinical data (Marini et al., 2012) document approximately thirty percent fewer treatment sessions for tattoo clearance when fractional Er:YAG preconditioning is added to picosecond protocols. Most TattooLase courses are completed in four to eight sessions versus five to twelve typical for picosecond-only treatment.

DOUBLED SAFE LASER ENERGY THRESHOLD

Marini et al. (2012) demonstrated that fractional Er:YAG preconditioning approximately doubles the skin's safe laser energy threshold. This means each session can deliver significantly more clearance work without the sub-epidermal blistering that single-laser tattoo removal protocols develop at higher energies.

IMPROVED CLEARANCE RATES

The Journal of Cosmetic Dermatology (2022) demonstrated that combining fractionated and unfractionated picosecond delivery improves fifty-percent-clearance rates from 69.2 percent to 84.6 percent over three sessions. TattooLase incorporates both modes plus the Erbium preconditioning step.

PHYSICIAN-PERFORMED, EVIDENCE-BACKED

Every TattooLase session is performed by Dr. Jetty personally. The protocol's core mechanisms (Erbium preconditioning, picosecond photoacoustics, fractionated picosecond LIOB) are each supported by peer-reviewed clinical evidence. We can show you the studies that support every claim we make.

The combination is what makes TattooLase work. Published clinical evidence supports each step individually; TattooLase brings all three together into one physician-designed protocol available only at Princeton Aesthetics.

Get Your Personalized TattooLase Plan

How does TattooLase work?

Mechanism of Action

TattooLase delivers three sequential laser steps in each session. First, fractional Erbium preconditioning on the Fotona SP Dynamis Pro creates pressure-relief microchannels through the epidermis above the tattoo. Second, tri-wavelength unfractionated picosecond pulses on the Cutera enlighten III platform fragment ink particles via photoacoustic shock. Third, fractionated picosecond delivery at lower fluence triggers Laser-Induced Optical Breakdown that breaks down dermal fibrosis and accelerates clearance. Each step has its own peer-reviewed evidence base.

STEP 1: ERBIUM PRECONDITIONING

Each session begins with a fractional Er:YAG pass on the Fotona SP Dynamis Pro. The Er:YAG laser creates microscopic vertical channels through the epidermis that act as pressure-relief ducts. Marini et al. (2012) showed this approximately doubles the safe laser energy threshold.

STEP 2: UNFRACTIONATED PICOSECOND

Calibrated tri-wavelength picosecond pulses on the Cutera enlighten III platform are delivered across the tattoo. The picosecond pulse duration creates a photoacoustic shock that fragments ink particles into sub-micron pieces.

STEP 3: FRACTIONATED PICOSECOND

Lower-fluence fractionated picosecond delivery triggers Laser-Induced Optical Breakdown in the dermis. The JCD 2022 trial showed this step improves clearance rates and breaks down dermal fibrosis that traps ink.

TattooLase three-step tattoo removal mechanism: Er:YAG preconditioning creates pressure-relief microchannels, tri-wavelength picosecond fragments ink via photoacoustic shock, fractionated picosecond triggers Laser-Induced Optical Breakdown in the dermis

TRI-WAVELENGTH COVERAGE

1064 nm, 532 nm, 670 nm
Three wavelengths cover the full ink color spectrum, including resistant cool tones that two-wavelength systems leave behind.

SAFE FOR ALL SKIN TYPES

Fitzpatrick I through VI
The 1064 nm wavelength used at the core of the protocol carries the broadest published safety record for darker skin tones.

DERMAL FIBROSIS TREATMENT

Scarred and previously-treated tattoos
The fractionated picosecond step breaks down the dense dermal fibrosis from prior tattooing or removal attempts that traps ink and stalls standard protocols.

IMMUNE-MEDIATED CLEARANCE

Lymphatic drainage over weeks
Fragmented ink particles are cleared by macrophage phagocytosis and lymphatic drainage in the four to eight weeks following each session.

MULTI-PASS LAYERING

Two stacked treatments per session
The preconditioning step permits multiple high-fluence picosecond passes in the same session. Marini et al. confirmed two stacked treatments is the optimal point.

Across four to eight sessions, the combined effect of these three modalities produces faster and more complete tattoo clearance with lower scarring risk than single-laser protocols. Dr. Jetty reviews progress at every visit and adjusts the protocol as the tattoo responds.

A Simplified Overview of the Process

For patients who want the quick summary, here is the TattooLase protocol distilled into four steps.

Preconditioning with Erbium Laser

The Fractional Erbium laser creates microchannels in the skin, directly removing some tattoo pigment and minimizing the risk of complications such as blistering.

Targeting with Unfractionated Pico Technology

Unfractionated picosecond technology delivers high-energy tri-wavelength pulses to break down remaining ink particles, aiding in their clearance.

Sequential Layering with Fractional Pico Technology

The fractional pico treatment uses ultra-short pulses to create Laser-Induced Optical Breakdown, effectively fragmenting residual pigments and breaking down dermal fibrosis.

Natural Healing Response

The body engages its immune response to clear fragmented pigments while fibroblast activity promotes collagen and elastin production for skin recovery.

Who Is a Candidate for TattooLase?

TattooLase is appropriate for adults seeking advanced tattoo removal where standard picosecond protocols may stall or progress too slowly. Dr. Jetty assesses candidacy at consultation based on tattoo ink density, color complexity, anatomic location, scarring, and prior treatment history. The protocol is safe across the full Fitzpatrick skin spectrum. For patients with simpler tattoos who do not require the advanced three-step protocol, we also offer Enlighten Tattoo Removal using the same Cutera enlighten III platform without the Erbium preconditioning step.

DENSE PROFESSIONAL TATTOOS

High ink saturation, dense dark lines
Patients whose professional tattoos have stalled or are progressing too slowly with picosecond-only treatment.

MULTICOLORED AND COVER-UP TATTOOS

Stubborn blues, greens, layered ink
The fractionated picosecond step addresses dense layered ink that standard treatment cannot fully reach.

SCARRED OR PREVIOUSLY-TREATED TATTOOS

Scar tissue trapping ink
TattooLase actively treats the scar tissue itself, making it the strongly preferred protocol for these cases.

Every candidate is reviewed by Dr. Jetty before any session begins. For simpler tattoos that do not require the advanced three-step protocol, the option to use Standard Enlighten Tattoo Removal is available.

Ready to Reclaim Your Skin with TattooLase?

Frequently Asked Questions

Is TattooLase safe for everyone?

TattooLase is safe across the full Fitzpatrick skin spectrum, including darker skin tones where standard single-laser protocols can carry pigmentary risk. The Erbium preconditioning step lets us use the Nd:YAG wavelength at higher fluences that would not be safe without it, which is part of why Marini et al. (2012) reported no dyspigmentation events even at the higher energies achievable with the combined protocol. Dr. Jetty reviews every patient’s skin type and tattoo history at consultation to confirm candidacy.
Most patients complete a TattooLase course in four to eight sessions spaced six to eight weeks apart, compared with five to twelve sessions typical for picosecond-only protocols. The exact session count depends on tattoo type: amateur tattoos typically need two to three sessions, professional tattoos four to six, multicolored or cover-up tattoos six to eight, and scarred tattoos six to seven. The published clinical data behind TattooLase (Marini et al., 2012) report approximately thirty percent fewer total sessions versus single-laser tattoo removal.
Most patients describe the sensation as quick warm snaps. Topical numbing cream or cooling is offered before treatment when appropriate. Marini et al. (2012) documented statistically significant pain reduction (α equals 0.01) in the Erbium-preconditioned treatment zone compared with picosecond-only treatment.
Downtime is minimal. Patients typically have mild redness and tenderness for one to three days. Most return to normal activity immediately. The Erbium preconditioning step specifically reduces the sub-epidermal blistering and edema that limit picosecond-only protocols, with Marini et al. (2012) documenting three-day-faster healing in the preconditioned zone.
Side effects are uncommon and significantly lower than with picosecond-only tattoo removal. The Erbium preconditioning step specifically reduces blistering, edema, and post-treatment pain. Marini et al. (2012) documented three-day-faster healing and significantly reduced pain in the preconditioned treatment zone. Mild redness and tenderness for one to three days are typical. Serious complications are rare when aftercare is followed properly.
Keep the area clean and dry for the first day, then gently wash with mild soap and lukewarm water and pat dry. Cover with a sterile bandage if recommended. Avoid hot showers, saunas, and steam rooms for forty-eight hours. Avoid rigorous exercise for twenty-four hours. Protect the treated area from sun with clothing and SPF 50+ sunscreen. Do not scratch or pick at the area. If a blister larger than a dime develops, contact the clinic. Hydrate well and eat a healthy diet to support immune clearance of the fragmented ink.
TattooLase combines three published clinical advances in one protocol. Fractional Er:YAG preconditioning (Marini et al., 2012) significantly increases the skin’s safe laser energy tolerance and reduces session count by approximately thirty percent. Tri-wavelength picosecond delivery on the Cutera enlighten III platform clears the full color spectrum, including resistant cool tones (greens, sky blues, teals) that two-wavelength systems leave behind. Fractionated picosecond delivery at lower fluence (Journal of Cosmetic Dermatology, 2022) improves fifty-percent-clearance rates from 69.2 to 84.6 percent over three sessions versus unfractionated picosecond alone. For patients with simpler tattoos who do not need the advanced three-step protocol, we also offer Enlighten Tattoo Removal on the same Cutera enlighten III platform without the Erbium preconditioning step.

Why Choose Princeton Aesthetics for TattooLase?

TattooLase is offered only at Princeton Aesthetics because it was designed here by Dr. Jetty. Every session is performed by Dr. Jetty personally on industry-leading platforms (Fotona SP Dynamis Pro for Erbium preconditioning, Cutera enlighten III for both picosecond modes). The protocol is supported by published peer-reviewed clinical literature, not marketing claims alone.

Physician-Designed Protocol

TattooLase was built from the ground up by Dr. Siva Teja Jetty, MD, not licensed from a device manufacturer. Every parameter of the three-laser sequence was developed at Princeton Aesthetics.

Performed Only by Dr. Jetty

No technicians, no delegated steps. Every TattooLase session is delivered personally by Dr. Jetty, the physician who designed the protocol.

Evidence-Backed at Every Step

Each step of TattooLase is supported by peer-reviewed clinical literature (Marini et al., 2012; Journal of Cosmetic Dermatology, 2022). We can show you the studies that support every claim we make.

Industry-Leading Platforms

Fotona SP Dynamis Pro for Erbium preconditioning. Cutera enlighten III for both unfractionated and fractionated picosecond delivery.

Safe for All Skin Types

The Nd:YAG 1064 nm wavelength used at the core of the protocol carries the broadest published safety record in Fitzpatrick IV through VI skin.

Approximately 30% Fewer Sessions

Published data document approximately thirty percent fewer treatment sessions for tattoo clearance compared with picosecond-only protocols (Marini et al., 2012).

Path to Standard Alternative

If your tattoo is appropriate for standard care, we also offer Enlighten Tattoo Removal on the same Cutera enlighten III platform without the Erbium preconditioning step.

Honest Candidacy Assessment

Dr. Jetty will tell you if standard Enlighten is appropriate for your tattoo rather than defaulting to the more advanced TattooLase.

Free Initial Consultation

Begin with an educational discovery session at no cost so you understand your options before committing to any treatment.

Comprehensive Aftercare

Written and verbal aftercare guidance after every session. The clinic is available for questions between visits. Aftercare is half the result with tattoo removal.

Continuity of Care

The same physician designs your protocol, performs every session, and reviews progress. Care does not pass through multiple hands.

Serving Princeton, NJ and Surrounding Communities

Patients from Princeton, Plainsboro, West Windsor, Lawrenceville, Hamilton, and beyond.

Schedule Your TattooLase Consultation at
Princeton Aesthetics Today!

Your Partner in Evidence-Backed Tattoo Removal. You deserve a tattoo removal protocol that combines the most current technology with published clinical evidence. At Princeton Aesthetics, TattooLase is delivered by Dr. Jetty personally, supported by peer-reviewed literature, with honest expectations set up front. Schedule a complimentary consultation to learn whether TattooLase is right for your tattoo.

4.8

from 75+ Patient Reviews

LaseMD Ultra skin resurfacing at Princeton Aesthetics, serving Princeton, NJ

Princeton Aesthetics

Why Patients Choose Princeton Aesthetics

Our Founding Principle

Princeton Aesthetics was founded by Dr. Jetty on a simple principle: every patient deserves a treatment plan built around their specific goals, anatomy, and needs — not a preset menu.

From laser resurfacing and skin tightening to body sculpting, hair restoration, and wellness treatments, we offer a complete range of services to address all your aesthetic needs under one roof — each designed with physician-level precision.

Whatever brings you here, Dr. Jetty personally oversees every protocol at our practice, ensuring the same clinical standards apply across every service we offer. Serving Princeton, New Jersey and surrounding communities from our Princeton Junction location.

How Use way work

Skin Rejuvenation
Non surgical Face Lifts
Injectables
Face & Neck
Advanced skin treatment at Princeton Aesthetics medical spa Princeton NJ
Body Sculpting
Non-surgical body sculpting at Princeton Aesthetics, Princeton Junction, New Jersey
Skin Rejuvenation
Skin rejuvenation treatment at Princeton Aesthetics Princeton NJ
Hair Restoration
Skin-Treatments-11 at Princeton Aesthetics Princeton NJ
Laser & Energies
Laser-Treatments-05 at Princeton Aesthetics Princeton NJ
Accessibility